SeaFit V20 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 17)

Seafit V20 Radio Owner’s Manual 17

Fig. 19a: TOT Set Display

Blinking

19. Time out Transmit

Setting

Nothing is more disruptive to Marine

VHF communications than when some

boater has his or her microphone

PTT

key pressed accidentally. The problem is

that there is no way to notify him that the

problem exists since the radio cannot

receive traffic.

The V20 has a Time Out Transmit feature

that allows you to set a maximum period

of PTT key press time before the radio

will revert to Receive Mode. This is set at

the factory at five minutes, but you can

enter any value from one to twenty min-

utes, or turn off the feature entirely.

To change the Time Out Transmit setting,

press and hold the MEM key and turn the

power on. Set the

TOT time by pressing

the

▲ or ▼ keys. (Fig. 20a)

• The

TOT Range is 00, 01–20.

• 00=TOT off

• 01=1 minute

• 20=20 minutes

After setting the TOT, press the PTT but-

ton to save and exit to Receive Mode.

• If a transmission exceeds the

TOT

time, the radio will stop the transmis-

sion and return to Receive Mode. The

message

TRANSMIT TIME

EXCEEDED

will show in the Radio

Status Display at the bottom of the

screen. (Fig. 20b)

20. Display Back-Light

If any key is pressed, the display and key-

pad light will turn on and remain on for

ten seconds after the last key press.

21. Battery Options for

the V20

The V20 comes with both the BP200

NiMH (Nickel Metal Hydride) recharge-

Fig. 19b: Transmit Time Exceeded display

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare